What Type of Software is Used to Control and Monitor Drones During a Survey Mission?

Mapping software is used for a variety of unmanned applications, such as aerial mapping, drone reconnaissance, oil and gas pipeline inspection, and agriculture.


also has a mobile application (Pix4DCapture) to automate the mapping process with compatibility not only with DJI drones but also with Parrot drones. Before beginning a survey mission, it is important to check that the drone's battery and connected devices, such as tablets, are fully charged and that the memory card in the drone's camera has enough empty space to capture the entire project. Reconnaissance drones generate high-resolution orthomosaics and detailed 3D models of areas where low-quality, outdated or even nonexistent data is available.

If no landing point is added outside the photogrammetry area, after the reconnaissance mission, the drone will fly and float at the last reference point. Orthomosaic and digital surface model created from aerial images taken by the WingtraOne topographic and cartographic drone. A large study area or problems with the remote control can result in the loss of radio contact with a drone. A drone study refers to the use of a drone, or unmanned aerial vehicle (UAV), to capture aerial data with downward-facing sensors, such as RGB or multispectral cameras and LIDAR loads. Aerial images taken by drones greatly accelerate and simplify topographic studies for land management and planning.

More than 50,000 students trust Drone Pilot Ground School, a training program managed by UAV Coach, the largest and most reputable online drone training academy in the SUA industry. The world of drone mapping is wide and potentially intimidating, but it's also full of opportunities for commercial drone pilots. In this step, the operator basically ensures that no one approaches the drone during takeoff or landing and that the weather conditions remain optimal for the reconnaissance mission. The overlay should be chosen according to the specific conditions of the study area and the requirements of the drone data processing software. Read this case study on the use of drone maps to create an extremely accurate topographic study before the development of a subdivision in northern Colorado.

During a drone study with an RGB camera, the floor is photographed several times from different angles and each image is labeled with coordinates.